Skip to main content
Call Pneumatix on 1800 342 224 Find a Supplier

PM20 SERIES | TOTAL AIR STATION

PM20 Total Air Station

Technical model PM20500VSD

A 20 HP Total Air Station delivering 2,100 L/min at 8 bar with a 500 L receiver, refrigerated dryer and inline filtration in one receiver-mounted package.

Find a Supplier Ask About This Model
Pneumatix PM20500VSD Total Air Station, three-quarter view of the receiver-mounted compressor with integrated refrigerated air dryer

Recommended Retail Price

$11,199 inc GST, excludes delivery

Available through Pneumatix dealer and distribution partners. Supplier pricing and availability may vary.

Core specifications

Motor power
15 kW / 20 HP
FAD at 8 bar
2,100 L/min (74 CFM) at 8 bar
Maximum pressure
10 bar / 145 PSI
Air receiver
500 L air receiver
Refrigerated dryer
PMD2400, 2,400 L/min
Pre-filter
1.0 micron
Post-filter
0.01 micron
Configuration
Total Air Station

Product overview

The PM20 Total Air Station is the higher-output integrated package in the Pneumatix compressor range. It combines the PM20 compressor, 500 L receiver and main air-treatment components in a coordinated arrangement.

It can suit larger workshops and industrial sites with multiple compressed-air users where the real simultaneous demand, pressure and growth allowance fit within the PM20 output level.

Why choose this model

  • 2,100 L/min at 8 bar
  • 500 L receiver included
  • refrigerated dryer included
  • inline filtration included
  • coordinated package for higher-demand sites

For a smaller footprint the PM10 Total Air Station delivers 1,000 L/min at 8 bar, and for higher demand the PM30 Base Mount delivers 3,200 L/min. The comparison table sets all five models against each other.

Included and not included

Included as standard

  • PM20 variable-speed rotary screw compressor
  • 500 L air receiver
  • Tank-mounted refrigerated air dryer
  • Inline pre-filtration and post-filtration
  • Digital compressor controller

Key technical data

Only verified values are published. Where a specification is still being confirmed, the row is omitted rather than estimated.

Verified specifications for PM20 Total Air Station
Technical modelPM20500VSD
ConfigurationTotal Air Station
Motor power (kW)15 kW
Motor power (HP)20 HP
Free air delivery2,100 L/min (74 CFM) at 8 bar
Maximum operating pressure10 bar / 145 PSI
Electrical supply3-phase / 415 V
Recommended circuit breaker32 A D-curve, three-phase, plus a 10 A double GPO for the dryer
Speed range1,440-3,600 RPM
Outlet size3/4 inch
Noise level65 dB(A)
IP ratingIP23
Drive methodDirect drive, integrated
Air receiver500 litres
Receiver design standardAS 1210-2010
Receiver hazard levelC
Receiver registrationWSV-0150570147
Refrigerated dryerIntegrated
Inline filtrationIntegrated
Dryer modelPMD2400
Dryer capacity2,400 L/min
Dryer pressure dew point2-10 °C
Dryer refrigerantR134a
Pre-filterPM20PREINLINE, 1.0 micron
Post-filterPM20POSTINLINE, 0.01 micron
Filtration rate2,400 L/min
Filter inlet/outlet3/4 inch
Air/oil separator volume11 L
Separator design standardAS 1210-2010
Separator hazard levelD
Separator registrationWSV-0150587050
Dimensions (L x W x H)1,930 x 800 x 1,760 mm
Net weight430 kg
Shipping dimensions (L x W x H)1,950 x 820 x 1,780 mm
Shipping weight432 kg

Best suited to

  • larger mechanical workshops
  • tyre and service facilities with multiple users
  • fabrication and engineering sites
  • CNC and manufacturing environments
  • other sites with greater simultaneous demand

Use the Compressor Sizing Guide

Installation planning

A 15 kW compressor is a meaningful electrical load. Confirm available site capacity, upstream protection, cable route, voltage drop, ventilation and service clearances before installation.

Plan the compressor installation before delivery

Downloads

Open the Pneumatix Product Documentation centre

Serviceability and support

Warranty and service work is performed through approved service providers. Spare parts and service items are available through approved service providers and the dealer network.

Warranty, parts and service

Plan the rest of the system

Product FAQ

What airflow does the PM20 Total Air Station deliver?

2,100 L/min at 8 bar on the current Pneumatix FAD basis.

What receiver is included?

A 500 L receiver is included in the current package.

Is it suitable for every 20 HP application?

No. Final selection depends on the real demand, pressure, storage, air quality and installation.

Next steps

Need help deciding between PM10 and PM20? Continue with your existing dealer, or ask Pneumatix to review the application and help narrow the selection.

Find a Supplier Ask About This Model

Call Pneumatix Enquire